Lisa Bonill - SNF9/14/20152015_Rough_CA::SNF::001746vector digital dataThe Fire Incident Mapping Tools (FIMT) is an ArcGIS extension designed to store, edit, display, and print wildland fire data.\\LTHP90807VN\C$\fsfiles\unit\fire\FIMT_v93\FIMT_Template.mdbFirePolygon0720This is a data set to represent the existing condition of a fire incident at the time data edit.The purpose of the data is to create maps so the fire overhead team can make good decisions and to show the field going personnel where all aspects of the fire are located and where in relation to their proximity are all other fire and fire suppression resources located.This data was produced using the Fire Incident Mapping Tools (FIMT) ArcGIS extension version 9.2.1.6.en9/14/2015ground conditionDailyREQUIRED: Western-most coordinate of the limit of coverage expressed in longitude.REQUIRED: Eastern-most coordinate of the limit of coverage expressed in longitude.REQUIRED: Northern-most coordinate of the limit of coverage expressed in latitude.REQUIRED: Southern-most coordinate of the limit of coverage expressed in latitude.REQUIRED: Reference to a formally registered thesaurus or a similar authoritative source of theme keywords.FireIncidentFIMTThere are no access constraints known on this data.There are no known use constraints on the data. Just beware that this data is gathered and produced in a method that is to meet time deadlines. Some of the data is not very accurate. Please check the accuracy values first (realizing that much of the time, these values are not provided or entered).UnclassifiedMicrosoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.3.1.3000Personal GeoDatabase Feature Class2015_Rough_CA::SNF::001746Lisa BonillSNFGIS Specialist5592970706lbonilla@fs.fed.usThis data is produced to give fire suppression resources ability to generally see where the fire and suppression resources are located. They do not have to be all that accurate. Please review the feature level metadata to see if the quality of the data is complete.This data is produced to give fire suppression resources ability to generally see where the fire and suppression resources are located. They do not have to be all that accurate. Please review the feature level metadata to see if the quality of the data is complete.This data is as complete as could logically be obtained to meet publishing deadlines for the day.This data is produced to give fire suppression resources ability to generally see where the fire and suppression resources are located. They do not have to be all that accurate. Please review the feature level metadata to see if the quality of the data is complete.Please review the feature level metadata to see if the quality of the data is complete.
Most of the data is heads up digitized on the screen or is pulled in from other layers. The FIMT extension maintains coincidence between the Fire Polygon, Fire Perimeter, and the Assignment Breaks.
For more information on Fire Incident Mapping Tools (FIMT), please go to http://gis.nwcg.gov/ website and then choose the Tools menu option. There will be links there to the release letter, software installation file, user's guide, tutorial, and other useful information.
John VarnerUSDA Forest ServiceRegion 2 Spatial Applications Coordinator303-275-5019jvarner@fs.fed.usM-F 7:30-12:00 / 12:30-16:30Best if contacted by E-mailMetadata imported.C:\DOCUME~1\jvarner\LOCALS~1\Temp\xmlC.tmpMetadata imported.C:\DOCUME~1\jvarner\LOCALS~1\Temp\xmlB0.tmp2010041210111200Dataset copied.\\LTHP90807VN\C$\fsfiles\unit\fire\FIMT_v93\FIMT_Template_reorg.mdb2010041210261600n/aVectorSimpleFALSE4TRUEFALSERough_Fire_Soil_Burn_Severity_29Sept2015Feature Class4FIDFIDOID400Internal feature number.EsriSequential unique whole numbers that are automatically generated.ShapeFeature geometry.ESRICoordinates defining the features.ShapeGeometry000GRIDCODEGRIDCODEDouble10100ACRESACRESSingle1300SBSSBSString2000AssignmentBreakFirePointFireLinePerimeterSectorCheck with the local land manager to get a copy of the data.Downloadable DataIt would greatly help to review the data using the Fire Incident Mapping Tools software, but it would not be required. The software is almost completely used to assist in standardizing the data structure and how the data is incorporated into the personal geodatabase.20100412SNFLisa BonillREQUIRED: The mailing and/or physical address for the organization or individual.REQUIRED: The city of the address.REQUIRED: The state or province of the address.REQUIRED: The ZIP or other postal code of the address.5592970706GIS Specialistlbonilla@fs.fed.usFGDC Content Standards for Digital Geospatial MetadataFGDC-STD-001-1998local timeThe data was generated to a broad resource standard. Data within will have differing levels of metadata. Primary use of the data is to meet emergency need and getting metadata on any and all features are pretty low on the priority list. Please review the metadata fields to determine if there would be of any use on the constraints of the use of this data.http://www.esri.com/metadata/esriprof80.htmlESRI Metadata Profilehttp://www.esri.com/metadata/esriprof80.htmlESRI Metadata Profileen2015100215443600FALSE20151019105347002015101910534700Rough_Fire_Soil_Burn_Severity_29Sept2015002file://\\ds.fs.fed.us\EFS\FS\NFS\WOEngineering\GMO-RSAC\RDAS\BAER_FINAL_SoilBurnSeverity\Rough_Fire_Soil_Burn_Severity_29Sept2015.shpLocal Area Network308743.505900355255.5361004066571.4345004093483.97110018.431ProjectedGCS_North_American_1983Linear Unit: Meter (1.000000)NAD_1983_UTM_Zone_11N<ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/10.1'><WKT>PROJCS["NAD_1983_UTM_Zone_11N",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137.0,298.257222101]],PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],PROJECTION["Transverse_Mercator"],PARAMETER["false_easting",500000.0],PARAMETER["false_northing",0.0],PARAMETER["central_meridian",-117.0],PARAMETER["scale_factor",0.9996],PARAMETER["latitude_of_origin",0.0],UNIT["Meter",1.0],AUTHORITY["EPSG",26911]]</WKT><XOrigin>-5120900</XOrigin><YOrigin>-9998100</YOrigin><XYScale>450445547.3910538</XYScale><ZOrigin>-100000</ZOrigin><ZScale>10000</ZScale><MOrigin>-100000</MOrigin><MScale>10000</MScale><XYTolerance>0.001</XYTolerance><ZTolerance>0.001</ZTolerance><MTolerance>0.001</MTolerance><HighPrecision>true</HighPrecision><WKID>26911</WKID><LatestWKID>26911</LatestWKID></ProjectedCoordinateSystem>Erase Rough_Fire_29Sept Rough_Fire_Soil_Burn_Severity_29Sept2015 C:\Users\ktakenaka\Documents\BAER\Rough_Fire\GIS\Perimeter\Rough_Fire_29Sept_ERASE.shp #15000000050001.0FGDCXTools Pro MetadataMicrosoft Windows Server 2008 R2 Version 6.1 (Build 7601) Service Pack 1; Esri ArcGIS 10.2.2.3574Rough_Fire_Soil_Burn_Severity_29Sept2015vector digital dataThe purpose of the data is to create maps so the fire overhead team can make good decisions and to show the field going personnel where all aspects of the fire are located and where in relation to their proximity are all other fire and fire suppression resources located.<DIV STYLE="text-align:Left;"><DIV><P><SPAN>This is a data set to represent the existing condition of a fire incident at the time data edit.</SPAN></P></DIV></DIV>FireIncidentFIMT<DIV STYLE="text-align:Left;"><DIV><P><SPAN>There are no known use constraints on the data. Just beware that this data is gathered and produced in a method that is to meet time deadlines. Some of the data is not very accurate. Please check the accuracy values first (realizing that much of the time, these values are not provided or entered).</SPAN></P></DIV></DIV>1-119.148488-118.62108436.97634536.725603ISO 19115 Geographic Information - MetadataDIS_ESRI1.0dataset002file://\\LTHP90807VN\C$\fsfiles\unit\fire\FIMT_v93\FIMT_Template.mdbLocal Area NetworkPersonal GeoDatabase Feature ClassShapefile8.431420151019EPSG8.2.6